A steel angle may be used to create a brick ledge on the face of a Superior Walls panel.  This procedure may also be used to support the edge of a concrete slab (porch or patio application).  See the following document for specific instructions and restrictions.

• Steel Angle Support Attached to Superior Walls Panels

You may add a door to your Superior Walls foundation if you carefully follow the instructions listed below.

• Adding a Door to an Xi Wall
• Adding a Door to an R-5 Wall
• Adding a Patio Door to an Xi Wall
• Adding a Patio Door to an R-5 Wall

Holes may be drilled through the (top) Bond Beam for wiring and plumbing drops.  See the following documents for information on proper hole placement and maximum allowable hole size.

• Drilling a Hole through the Bond Beam - R-5
• Drilling a Hole through the Bond Beam - Xi

Electrical wiring in a Superior Walls wall system can be simply accomplished by following the suggested methods shown in the document below.

• Electrical Wiring - Xi Wall System

You may add a window to your Superior Walls foundation if you carefully follow the instructions listed below.

• Adding a Window to an Xi Wall
• Adding a Window to an R-5 Wall

Important guidelines on drywalling and on installing additional insulation to your Superior Walls foundation can be found in our “Homeowner Guide.”